The average pricing of Scalextric slot cars are affordable in 2019. Many cars are in the $39 range which gives many users access to them. At this price range it’s possible to purchase at least three cars per year.
Pricing slot cars at lower levels is very encouraging; it allows more people to be exposed to the hobby. Prior many of the cars were around $50 which is difficult to spend on a toy.
There are multiple brands in that higher category such as NSR and Slot.it. When you get into one of these brands you are a serious collector most likely. They are considered the upper scale of slot car racing. These cars are more delicate and require a little more care. They are true replicas of their real counter parts.
Motorsports racing at home has changed considerably over the years. Tracks have gotten longer in length while being able to hold larger cars. Elaborate tracks can be built anywhere with store purchased tracks. A hobbyist can build an exact replica of a real track over time.
Cars are very detailed and are tuned to be quick while sticking to the track. Goodyear and Firestone tires give a realness to match the exteriors. They come in a variety of models such as Formula 1, DTM, super cars, trucks, motorcycles, and vintage.
Digital chips allow home motorsports to be taken to the next level. If you want to allow the car to be tracked for pole position or switch lanes add a chip. Chips also allow for automatic car control that allow one person to race alone against a computer driven car. It also allows the car to be run either direction on the track.
Racing controllers have more than triggers to control the acceleration. Now they include a button that allows a driver to switch lanes at will. With the ability to switch lanes there’s also ways to brake instantly. Wireless technology allows racers to position themselves anywhere around the track. Vibration feedback indicates the start of a race, low fuel or a flat tire.
Downloadable apps allow the track and cars to talk between each other. Control top speeds, fuel usage, track lap times, change the weather and simulate pit stops. Talking voices within the apps tell you which place you are in or when to pit.
Tracks are durable, made to last a lot longer and not easily break. Interlocking pieces allow tracks to not slide apart while racing. Very minimal dead spots in large setups like in the past. If you encounter a dead spot extension wiring can be purchase to solve it.
Six car racing can be achieved on 1/32 tracks either controlled by people or the computer system. Cars are able to run independently without being affected by another racer. Yellow caution flags can be implemented to give a real world racing experience.
This Viper HO yellow slot car was found over the weekend. I was able to pick up this beauty for $17 including shipping. It’s a good addition to the red Viper that I found the week before.
These little cars are an easy entry into the slot car hobby. If you decide not to continue in the hobby these cars won’t hurt your budget. It’s easy to give them away or resale them.
An advantage to purchasing cars like this is it gives you the ability to buy spares just in case one breaks. It’s a matter of time before one car stops working for any number of reasons. When that happens you can use that car for a parts car.
Limited editions allow for slot cars to be collectables. It creates a platform where toy cars can be considered investments. You can’t afford to wait for a car to be used hoping that it will become cheaper. There’s a good chance the longer you wait the higher the cars cost will rise.
Both Carrera and Scalextric make limited editions of their cars. Scalextric likes to put their limited edition cars in a specialized box. It’s usually a purple box with a special paper wrapper around it.
Carrera doesn’t really do that, but they build a limited quantity for most of their cars.
I needed a 1:24 slot car track now that I figured out that a Scalextric wouldn’t hold a 1:24 car. After doing some looking it appears that Amazon has damaged box items for sale.
I purchased a 1:24 slot car track for about $200 cheaper than the original price. I will receive the track sometime this week and I’ll share an update. This is a big risk so I’m hoping that the track is fine and only the box is damaged.
Project build part 3 adding digital chip c7005 was somewhat of a success. I was able to prove that it is possible to put one of these chips in a 1:43 car. With that being said I ran into some issues that I didn’t foresee.
This small car has trouble crossing over the change lane track. It engages the lane change switch with no problem at the press of a button, but once it tries to change lanes it gets stuck. The guide is really small under the car so when it tries to slide over into the next lane it can’t. I tried to modify the track guide a little but didn’t want to risk messing up an expensive track for a $15 car.
The other issue with this project build part 3 is the car isn’t as fast anymore. The Audi is running around half the speed. It’s fast enough for training a young racer on slot cars but not for someone advanced. I may at some point take it back apart and see if I can fix the speed but right now it’s not a big deal to me.
Project Build Part 2 started today on the orange Audi DTM. I was a little surprised to see there’s a lot of space to work with inside this car. The engine in the car is very small and there’s no unnecessary wiring.
I’m going to turn this car digital so it can change lanes and run on any lane. To do this I’m going to use Scalextric chip c7005. I’ve done this multiple times on Fly 1:32 cars but never on a Carrera 1:43.
Today was my first exposure to a Carrera 1/24 slot car. The quality of these cars is the highest that I’ve ever seen. The weight of the car is heavy plastic; it felt superb as I held it in my hand.
I’ve never seen a slot car as big as this one. The Carrera 1/24 car has lights and I believe there’s a digital chip in it by default. The cars are a little pricey but truly worth it. The detail that has been put into the building of this car is like an actual model car.
I don’t have a Carrera track to actually run it on, but that will be my next purchase at some point.
Viper deals are still going strong on ebay in 2019. I was able to pick up this red one for $19.80 (including shipping). If you are looking to add some additional cars at a fair value I suggest considering one.
I’m not sure why these cars haven’t gained a lot of popularity. The real car does have a following by American sports car enthusiasts.
This car requires a little bit of cleanup; I’ll do that this weekend and post back how it handles on the track.